|
HEX1CHIP Carbide
CHIP #1 Parts |
HEX3CHIP Carbide
AGGRESSIVE CHIP #3 |
HEX4CHIP Carbide
AGGRESSIVE CHIP #4 |
|
 
|
|
|
|
Use in removing thinset,
mastics, glue, rubber or foam backed carpet residue, dirt buildup,
ice and paint.
|
4 sharp edges. Useful when taking up
unusually difficult-to-remove mastics and glue. The chip has a hole
to secure the chip when working in rough conditions. |
WITH 8 SHARP EDGES! Best used to remove thin paint
and epoxy from concrete, but works well for other concrete surface
removal applications. So aggressive, we recommend that it only be
used with the Hexpin® Super Clutch™ plate.
|
|
Diamond Hexpin,
Green |
Diamond Hexpin, Blue |
Diamond Hexpin,
Gold |
|
 |
 |
 |
|
Green Hexpin |
| Part number |
Specs |
| HEX1PNG |
For
general purpose use. |
|
|
Blue Hexpin |
| Part number |
Specs |
| HEX1PNB |
Hard bonded
blue pins. Use for abrasive surfaces. |
|
|
Gold Hexpin |
| Part number |
Specs |
| HEX1PNC |
Use
when a coarse diamond is required. |
|
|
|
|
Diamond segmented pad for Pearl's
Hexplate |
|
|
|
(replacement parts) |
| Part number |
Specs |
Part number |
Specs |
Part number |
Specs |
|
HEX4SEG |
Complete
diamond pin holder w/diamond pad- 6
required per plate. Remove your existing
hexpins- replace with these aggressive
diamond segments. |
HEX4PAD |
Diamond pad
only- 4 segments- includes nuts &
washers |
HEX4HLDR |
Pad holder
only- includes springs and nuts/washers |
|
|
|
|
|
|
Hexblock with
diamond pad |
Hexblock segmented pad only
(replacement)
|
Diamond pad holder |
|
|
|
|
|
Hexblock
assembly |
Pad only |
Pad holder
only |
| Part number |
Specs |
Part number |
Specs |
Part number |
Specs |
|
HEX2BLK4 |
|
Complete
block with diamond pad. For use
on EDCO type machines.
Not for Hexplates |
|
|
|
|
HEX2BSEG
(2 shown- sold each)
|
|
Replacement
pad for HEX4SEG diamond pin. Attaches to
the block. Use wet or dry.
Includes nuts & washers.
For
use on EDCO type machines.
Not for Hexplates
|
|
|
|
|
HEX2BHLDR (block only) |
Holds the HEX4PAD diamond pad. Includes springs, nuts, and
washers. For use on EDCO type machines.
Not for Hexplates
|
Also
available |
|
Part number |
Specs |
|
HEX2BHRD
|
Replacement Hardware for for diamond pad- 2 springs, 3
nuts, 3 washers |
|
|
|
|
|
Turbo Cut Hexpin
|
Diamond
Cup
Wheel
|
|
|
|
|
|
|
| Part
number |
Specs |
Part
number |
Specs |
|
HEX1FTC |
Turbo
Cut™ Hexpin® (complete) |
HEX1CUP |
4" Cup wheel |
|
FSP4516 |
4 1/2
X 7/8 C16-Turbo Cut disc |
HEX15811 |
Quick Change
Attachment (pin) |
| FPD50 |
Replacement plastic backup pad |
|
|
|
HX1FTCHL |
Turbo
Cut holder with nut |
|
|
|
HX1FTCNT |
Nut
for Turbo Cut holder |
|
|
|
HX1FTCSC |
Screw
for Turbo Cut nut |
|
|
|
Call
for pricing. Subject to Pearl's minimum order policy
U.S.
Government Credit Card
